Factory Direct Structural Steel Sections for Cost-Effective Sourcing

Hot-Rolled Steel Angle is a solid L-shaped section rolled directly from heated steel billets. Q235B and Q355B are available in equal and unequal angles, covering common sizes from 20×20 mm to 200×200 mm and thicknesses of 2–24 mm. Standard 6 m, 9 m and 12 m lengths are available, with cutting and fabrication for structural, machinery, municipal, power and building projects.

Hot-Dip Galvanized I-Beam combines the load-bearing geometry of hot-rolled I-section steel with a factory-applied zinc coating for outdoor corrosion protection. Q235B and Q355B grades are available in national-standard sizes from 10# to 63#, with fixed lengths, cutting, drilling, beveling and straightening available for project orders. It is used for factory frames, equipment supports, solar structures, municipal works, ports and other exposed steelwork.

Hot-Rolled I-Beam is available in Q235B and Q355B, with sizes from 10# to 63# and standard lengths of 6 m, 9 m and 12 m. It is used for factory beams, equipment bases, platforms and pipe racks, with cutting and drilling available.