Products

Galvanized C Purlin is a cold-formed steel section for outdoor and corrosive environments where uncoated C purlins require frequent maintenance. The profile is roll formed, cut and punched before overall hot-dip galvanizing, giving the finished section a zinc coating on its surfaces, corners and processed areas. Q235B and Q355B are available in C80–C300 sections with 0.8–3.0 mm wall thickness. Typical applications include photovoltaic projects, factory roofs, coastal structures, livestock buildings, chemical plants, wastewater facilities and outdoor equipment supports.

Cold-Formed C Section Steel is a lightweight structural section produced by continuously roll forming steel strip at room temperature. Compared with conventional hot-rolled channel sections, its section dimensions, flange geometry, and length can be controlled more precisely while using thinner steel where the structural design permits. Q235B and Q355B grades are available in C80–C300 sections with 0.8–3.0 mm wall thickness. It is commonly used for purlins, wall framing, indoor mezzanines, equipment supports, partitions, and other light steel structures.

Hot-Dip Galvanized Steel Rebar uses HRB400, HRB400E, HRB500 and HRB500E ribbed steel bar with a galvanized coating for reinforced concrete exposed to moisture, chlorides, soil and outdoor conditions. Diameters range from 6–40 mm, with 9 m and 12 m standard lengths and custom lengths of 6–15 m.

Hot-Rolled Steel Rebar is ribbed reinforcement steel for concrete buildings, industrial structures, bridges and civil works. Available in HRB400, HRB400E, HRB500 and HRB500E, with Φ6–Φ40 mm diameters, 9 m and 12 m standard lengths, and 6–15 m custom lengths.

Galvanized Wire Rod is a low-carbon steel wire rod processed with an overall hot-dip zinc coating for outdoor use or further wire drawing. Q195 and Q235 grades are available in 5.5–16 mm diameters, with standard or heavy zinc coatings and 1.5–2.5 ton coils. It can be supplied for grounding, binding and fencing, or used as feedstock for galvanized steel wire production.

Hot-Rolled Wire Rod serves as feedstock for steel wire, nails, cold heading parts and wire mesh. Q195 and Q235 grades are supplied in 5.5–20 mm diameters and 1.8–2.5 ton coils. Controlled rolling and cooling support consistent conditions for drawing and further processing. The black, uncoated surface is intended for downstream processing rather than finished outdoor use.