Products

Hot-Rolled Steel Channel is a solid U-shaped structural section produced directly from heated steel billets through multiple rolling passes. Q235B and Q355B cover general and higher-load applications, with common sizes from 5# to 40# and standard lengths of 6, 9 and 12 m. It is used for structural frames, equipment bases, supports, municipal works, machinery and energy projects, with custom cutting and fabrication available.

Hot-Dip Galvanized Steel Angle is a hot-rolled L-section steel protected by an overall zinc coating for outdoor and moisture-prone service. Q235B and Q355B grades are available in equal and unequal angle profiles, with common sizes from 20×20 mm to 200×200 mm and thicknesses from 2–20 mm. The material is supplied for solar structures, power projects, curtain walls, guardrails, equipment supports, warehouses and general steel fabrication.

Hot-Rolled Steel Angle is a solid L-shaped section rolled directly from heated steel billets. Q235B and Q355B are available in equal and unequal angles, covering common sizes from 20×20 mm to 200×200 mm and thicknesses of 2–24 mm. Standard 6 m, 9 m and 12 m lengths are available, with cutting and fabrication for structural, machinery, municipal, power and building projects.

Hot-Dip Galvanized I-Beam combines the load-bearing geometry of hot-rolled I-section steel with a factory-applied zinc coating for outdoor corrosion protection. Q235B and Q355B grades are available in national-standard sizes from 10# to 63#, with fixed lengths, cutting, drilling, beveling and straightening available for project orders. It is used for factory frames, equipment supports, solar structures, municipal works, ports and other exposed steelwork.

Hot-Rolled I-Beam is available in Q235B and Q355B, with sizes from 10# to 63# and standard lengths of 6 m, 9 m and 12 m. It is used for factory beams, equipment bases, platforms and pipe racks, with cutting and drilling available.

Hot-Dip Galvanized Precision Steel Right-Angle Tube combines a sharp 90° profile with factory-applied hot-dip zinc protection. It is made from precision steel right angle tube in Q235B or Q355B and is designed for outdoor structures where straight lines, clean corners and corrosion resistance all matter. Typical uses include landscaping, solar structures, municipal facilities and coastal frames.